Ceasefire Watermist Portable Extinguishers

The revolutionary new Watermist Extinguishers are designed to combat Class A, F and Electrically started fires. Specially designed rotors in the extinguisher mixes water and air in a pre-set proportion to generate a fine mist of 40-60 micron molecules. These tiny droplets have a surface area coverage many times higher than water. (The principle is simple: the smaller the particles of water, the further they spread and the faster they cool.) The mist is then propelled through a specially designed nozzle, giving it a large throw. On coming in contact with the flames, it turns into steam and envelopes the flames, this is called the blanketing effect. Water cools the fire down to below combustion levels and cut-off the oxygen supply. Without oxygen or heat, the fire dies out in seconds. Because this isn’t water in its natural state, the dangers of electrocution and flooding are eliminated. Which means, this powerful, reliable, efficient extinguisher can be used on most kinds of fire, including electrically started fires. Features: - Classification: Fights fires of Class A, F and Electrically started fires - Water Efficient: Specially designed nozzles that convert water into a fine mist with minuscule droplets that increase the coverage of water in the fire zone - Solid stainless steel body: Its solid stainless steel body can withstand high temperatures - Pressure gauge: Easy-to-read pressure gauge for ease of monitoring - Reduces damage: Uses filtered water, eliminating collateral damage - Environment friendly: The use of potable water in combination with cutting-edge technology ensures this extinguisher has no negative impact on the environment - 9 Years Warranty: The 9 Years Warranty means Ceasefire is looking out for the health of your fire safety products - Certification: BIS, LPCB, BSI Kitemark, and PED certified - PRV + NRV for safer, simpler servicing. The enhanced valve system provides added pressure safety and enables efficient maintenance without fully depressurising the extinguisher - Built to last. Product information is screen-printed directly onto the cylinder for excellent resistance to weather conditions, tampering, scratching, rubbing, chemicals and fading- keeping critical information long lasting - Find it when visibility is low. A phosphorescent locator sign at the base helps identify the extinguisher in darkness, low visibility and smoke, enabling faster access during emergencies. Conforms to DIN standards and exceeds DIN 67510 Part 4 requirements - Less packaging waste. More responsibility. Recyclable paper, corrugated board and natural rubber replace conventional packaging materials, helping reduce carbon footprints and making recycling easier - Quick to mount. Easy to access. The secure “J” hanger makes installation and removal quick and convenient while keeping the extinguisher firmly in place and readily accessible Specifications: Agent: WATER Stored pressure/cartridge: STORED PRESSURE Bulk range discharge (brd as per is-15683): > 2 METERS Bis marking: YES Ce marking: YES Discharge mechanism: SQUEEZE GRIP Applicable on fires: A, F & ELECTRICAL STARTED FIRE Can construction: DRAWN ROLLED & MIG WELDED Valve / cap construction: FORGING AND MACHINING External coating: EPOXY POLYESTER POWDER Helium leak detection testing: YES Warranty in years: 9 Working pressure: 15 BAR Hydrostatic test pressure: 35 BAR Approx body thickness: 1.5 MM Cylinder material spec.: SS 304 (1.4301) Operating temperature: 5 °C TO 60°C