Ceasefire 2 8 Loop Panel Fire Alarm Control Panel Standard (TI-002320-ST)

2 8 Loop Panel Fire Alarm Control Panel Standard (TI-002320-ST) Features: - Fully expandable from2-8 loops via plug-in loop driver boards - 20 programmable Zonal / 25 System LEDs with slide-in labels - Dedicated loop driver to support fully digital communication protocol - Intelli-Sense graphical LCD user interface and support for up to 200 fire zones by default - Allowing full EN54 compliance without additional hardware - Dual flash-based microprocessor technology with real-time clock onboard - Dedicated USB & RS232 serial port for direct - PC or modem connection - Installer friendly Auto-learn, Loop Detection and Onboard Scope facility for ease of - Commissioning and fault finding - Fully programmable via the onboard - Alphanumeric keypad, or PC configuration tools - The graphical display can be configured to - operate with virtually any language or character set and allow the installer's logo to - be applied using the Logo application software Specifications: Model: TI-002320-ST Type: Addressable Base Technology: Dual flash-based processors with real-time clock, trace diagnostics, programmable languages and character sets Display: White backlit 240 x 64 graphical LCD LED Indicators: 22 red (1 x Fire, 1 x More Alarms, 20 x Zonal Programmable), 1 green (Power), 13 amber and 7 bi-colour (Fault & System) Controls: Alpha numeric keypad permitting Navigation, Reset, Mute, Silence, Resound, Evacuate, and 4 x Programmable Push Buttons Actual 2 Protocol: Fully digital communication protocol Number of Fire Zones: 2000 (200 per individual panel) Number of Loops: Dedicated 2-8 loop control panel Devices per Loop: 240 Addressable Detectors and Devices Loop Current: 500mA On-Board Sounder Circuits: 8x1 Amp programmable On-Board Relays: 4x1Amp 30vAC/DC programmable (10mA,5vmin)-expandable to 8 using 2x TI-002370 (2-Way Relay Card) Auxiliary Supply: 2 x 24v500mA Programmable Input: 2 x monitored programmable input on-board Programmable Key Switch Inputs: 16 volt free digital inputs Total Available Output Current: 2 x 5A maximum available for loop current + sounder outputs + auxiliary supply Mains Supply: 200 - 240v 47-63 Hz AC (+10%, -15% tolerance) 1.4Amax Battery Capacity: 2 x 24V4Ah internal(min),2x24V,18Ah internal(max), or 1x24V45Ah internal(max) and1x24V 45Ah external (max) using optional battery enclosure Charger Current: 2 x 2A temperature compensated Serial Port: 2 x on-board RS232 connection for PC, modem, IP, or portable printer USB Interface: 2 x USB B type connection for PC communication Programming: On-board keypad or PC running Windows tools Event Log: 2 x 5000 event & diagnostic + 500 fire Networking: On-board Fault-tolerant network card (TI-002324). Printer (optional): On-board Enclosure/Colour: Steel IP30 /RAL7035 Cable Entry (20mm knockouts): 30 x top, 6 x rear, 3 x bottom plus 2 x double knockout rear Approvals: EN 54-2:1998, EN 54-4:1998 & EN54-13:2005