Kent Solar Hybrid Inverter G3

KENT Solar Hybrid Inverter G3-15kW is a three phase, high frequency inverter with an IP66 weatherproof build. It combines solar, grid and battery to deliver uninterrupted power for larger homes and commercial spaces. With switchover under 5 ms and 200% overload handling, it keeps appliances running during power cuts. It supports solar panel arrays, diesel generators and grid supply, and up to six units can run in parallel for higher load. Features: - IP66 Protection Rating: Sealed against dust & moisture for worry free performance - 2 × PV Solar: Dual MPPT-oversize the array up to 200% of rating - 200% Overload: Handles 200% overload for up to 10 seconds - High Efficiency: >97% efficient - high-frequency IGBT design - < 5 ms Switch-Over: Near-instant switchover, no compressor restart - On-Grid Mode: Runs in pure on-grid mode without battery requirement - Smart Load: Sheds non-essential loads based on Battery SOC, diverts surplus solar - Balance Phases: 100% unbalanced output-up to 50% on one phase - Parallel Ready: Up to 6 units in parallel for higher load - Lower Bills: Time-of-Use ready-shift heavy loads to cheap hours - KENT CentCom™ Cloud: For seamless monitoring, configuration, & remote diagnosis - 4G Data Logger: Data on Indian server with 5-year 4G data pack Specifications: Net Weight: 42 kg Product Dimensions (mm): 305(L) x430(W) x660(H) Max. Input Voltage: 1000 d.c.V Nominal Output Voltage: 380/400 a.c.V (three phase) Maximum Power: 15 kW (15 kW) / 12 kW (12 kW) / 10 kW (10 kW)