Jain HDPE (PE) Pipe

Jain HDPE (PE) Pipe is a polyethylene pipe from Jain Irrigation Systems. Subsea Offshore HDPE pipeline up to 2500mm diameter. PE as a material is very tough and inert material, hence there are no effects of surrounding aggressive soil conditions. PE pipes are light in weight, easy to handle, transport & install. The performance of PE pipes during its entire lifetime remains the same, no scale build-up, no-erosion, no-corrosion, no effect of sunlight/UV rays if installed above ground exposed to sun. PE pipes & fittings are available up to 2500mm outer diameter. PE pipes and fittings are available as per all Indian and all International Standards in PE 63, PE80 and PE100 material grade. The water, chemical or any type of fluids are conveyed through the network of interconnected PE pipes and fittings which are 100% leak-proof, and the life of PE Pipes and fittings is at least 100 years. The Life Cycle Analysis shows PE pipes totally eco-friendly by its low energy consumption in fluid conveyance pipelines. Because of a smoother internal surface, PE pipes need lesser electricity for pumping the water. In addition to this the major advantage of PE pipes is its flexibility & leak-proof joints. Because PE pipes are flexible in nature, PE pipes easily take the shape of ground terrain inside industrial area or take the shape of trench profile which directly leads to saving in pipes accessories life bends, elbows and trenching cost. PE Pipes are available in required lengths up to 12m straight lengths. The water conveyed through Jain PE pipes is fit for human consumption and as PE pipes are inert in nature any type of fluid, chemical, effluent can be conveyed. PE as a material is very tough and inert material, hence there are no effects of surrounding aggressive soil conditions or contents of fluid conveyed. PE pipes are light in weight, easy to handle, transport & install. The performance of PE pipes during its entire lifetime remains the same, no scale build-up, no-erosion, no-corrosion, no effect of sunlight/UV rays if installed above ground exposed to sun. PE pipes & fittings are available up to 2500mm outer diameter. Features: - Manufactured from virgin pipe grade raw materials (PE80, PE100) - Excellent corrosion and chemical resistance. Inert to most acidic and alkaline solutions - High flow characteristics - Light in Weight - Easy to handle & transport - Excellent flexibility combined with strength - Good abrasion resistance - Smooth inner walls minimises frictional losses - Safe for potable water supply - Manufactured as per IS-4984, ISO-4427, DIN8074, ASTM D 3035 BS-6437, IS 14333, IS14151, BS EN 12201, DIN 8074/75 standards in PE-63, PE-80 and PE-100 grades - Manufactured from 20 to 2500 mm sizes at various pressure rating from 2.5 to 25kg/cm2 (35.5 to 227.5 psi) - Upto 12m in straight lengths and coils - Application: Subsea Offshore HDPE pipeline up to 2500mm diameter - Application: Sea Water Intake and Outfall pipeline for Desalination plant & Power plant - Application: Canal replacement using HDPE pipelines - Application: Lift and gravity water supply systems - Application: Micro & sprinkler irrigation systems - Application: Sewerage pumping and effluent disposal systems