Makita TD003G Cordless Impact Driver

Makita TD003G cordless impact driver: 40Vmax XGT BL Brushless Cordless Wood/Bolt/T-Mode 220 N·m Impact Driver. Features: - 40Vmax XGT BL Cordless T-Mode 210 N·m (1,860 in.lbs.) Impact Driver - Combination of sufficient fastening performance and high cost-competitiveness achieved by carefully selecting the functions - Aluminum hammer case + Black bumper - Simple impact power selection: ∙ 4 modes (Max/ Hard/ Medium/ Soft for bolt) ∙ 1 T-mode (for thin metal only) - Max fastening torque: 210 N·m • Despite increased cost-competitiveness, the max fastening torque is close to that of TD001G, the flagship model of our XGT Impact drivers • Extended overall length ensures sufficient performance of hammer, enabling to outperform TD001G in heavy-duty operation - Light mode • To turn on the light, set F/R change lever in the neutral position, then pull the switch trigger. To turn off the light, pull the switch trigger again • The light turns off automatically one hour after turned on - Excellent performance in continuous heavy-duty operation High power 40Vmax XGT Li-Ion battery reduces the current load on the controller, allowing for continuous heavy-duty operation - Constant speed control allows to operate the tool at the same speed as that at which you operate the tool on a full charged battery, even when the remaining battery capacity becomes low - One-touch bit installation • Smoother installation of the bit has been achieved by reducing the resistance against insertion of the bit • By increasing the load of sleeve holding spring, we have reduced the chance of unexpected falling off of the bit - Anti-bit wobbling structure - XPT (eXtreme Protection Technology) - BL motor - Soft grip - Belt clip - One LED job light each on both sides Specifications: Capacity: Machine screw: M4 - M8 (5/32 - 5/16") High strength bolt: M5 - M14 (3/16 - 9/16") Steel: 22 mm (7/8") Wood (Self-feed bit): N/A mm (N/A") Standard bolt: M5 - M16 (3/16 - 5/8") Coarse thread (in length): 22 - 125 mm (7/8 - 4-7/8") Wood (Auger bit): 24 mm (15/16") Masonry drill diameter: N/A mm (N/A") Hole saw diameter: 38 mm (1-1/2") Shank/Drive: Hex Shank 6.35 mm (1/4") No Load Speed (RPM): Max / Hard / Med. / Soft / T mode: 0 - 3,700 / 0 - 3,200 / 0 - 2,100 / 0 - 1,100 / 0 - 2,400 Impacts per minute (IPM): Max / Hard / Med. / Soft / T mode: 0 - 4,100 / 0 - 3,600 / 0 - 2,600 / 0 - 1,400 / N/A Fastening torque: Hard / Med. / Soft: 170 / 50 / 20 N·m (1,510 / 440 / 180 in.lbs.) Max fastening torque: 210 N·m (1,860 in.lbs.) Max output: 520 W Vibration Level: Impact tightening of fasteners of the maximum capacity of the tool: 11.9 m/s² Vibration K Factor: Impact tightening of fasteners of the maximum capacity of the tool: 1.5 m/s² Sound Pressure Level: 95 dB(A) Sound Power Level: 106 dB(A) Noise K Factor: 3 dB(A) Dimensions (L x W x H): w/o Battery: 121 x 86 x 195 mm (4-3/4 x 3-3/8 x 7-5/8") w/ BL4040: 121 x 86 x 252 mm (4-3/4 x 3-3/8 x 9-7/8") w/ BL4080F: 121 x 86 x 293 mm (4-3/4 x 3-3/8 x 11-1/2") w/ BL4020 / BL4025: 121 x 86 x 245 mm (4-3/4 x 3-3/8 x 9-5/8") w/ BL4050F: 121 x 86 x 274 mm (4-3/4 x 3-3/8 x 10-3/4") Net weight: 1.7 - 2.9 kg (3.7 - 6.4 lbs.) Standard accessories: TD003GZ: Hook: 346317-0(1) TD003GA201: Hook: 346317-0(1), Connector plastic case: 821550-0(1), Inner tray: 835F94-0(1), Battery BL4020: 191L34-7(2), FAST CHARGER DC40RC(1)