Makita HR2630 Combination Hammer

Makita HR2630 combination hammer: 26 mm (1") 2.4 J Combination Hammer, SDS-PLUS Bits. Features: - Re-located operating mode lever for increased protection and durability; enables switch to rotate both left and right - Improved bit guide for increased bit stability during drilling applications - Easy-to-grip handle gives maximum power thrust and provides a sure and comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip - Soft grip provides more comfort and control - High durability design with zig-zag armature varnish, enhanced sealing, improved impact bolt and impact reducing cushion ring - Compact & Lightweight design obtained by minimizing motor weight, with a newly designed tool-structure - Powerful 800 W motor delivers 2.4 J of impact energy to handle the most demanding applications - Torque limiter stops rotation if bit jams for increased operator safety and enhanced motor protection - Forward/reverse lever - position of the switch allows brushes to be positioned so that the drill maintains same speed and torque in forward and reverse - 3-Mode operation for "Rotation Only", "Hammering with Rotation" or "Hammering Only" - Variable speed trigger allows operator to adjust speed based on materials or application - 40 Bit angle settings allow the bit to be set at optimum positions - One-touch sliding chuck for easy bit installation and removal - Depth gauge for increased drilling consistency - Recessed lock-on button for continuous use - Optional dust cup connectable to Makita vacuum cleanesr without joint parts - Double insulated Specifications: Continuous rating input: 800W Impact Energy: EPTA-Procedure 05/2009: 2.4 J Our experimental conditions: 2.9 J Capacities: Concrete: 26 mm (1") Core Bit: 68 mm (2-11/16") Diamond Core Bit (Dry Type): 80 mm (3-1/8") Steel: 13 mm (1/2") Wood: 32 mm (1-1/4") Blows Per Minute (BPM): 0 - 4,600 No Load Speed (RPM): 0 - 1,200 Sound Pressure Level: 90 dB(A) Sound Power Level: 101 dB(A) Noise K Factor: 3 dB(A) Vibration Level: Hammer Drilling into Concrete: 15.0 m/s² Vibration K Factor: Hammer Drilling into Concrete: 1.5 m/s² Dimensions (L x W x H): 385x77x209 mm (15-1/8"x3"x8-1/4") Net weight: 2.8 - 3.3 kg (6.3 - 7.2 lbs.) Power supply cord: 2.5 m (8.2 ft) Standard accessories: Side Handle, Depth Gauge, SDS-Plus Bit Set (country-specific), Bit Grease (country-specific), Dust Cup (country-specific), Bull Point (country-specific), Scaling Chisel (country-specific), Cold Chisel (country-specific)