Makita GA5092 Angle Grinder

Makita GA5092 angle grinder: 125 mm (5") 1,900 W SJS II AFT Angle Grinder, Anti-Restart Function, Soft Start, Slide Switch. Features: - 125 mm (5") 1,900 W SJS II AFT Angle Grinder, Anti-Restart Function, Soft Start, Slide Switch - Improved power consumption and durability, and are equipped with AFT (Active Feedback sensing Technology) for kickback reduction - Easy-to-hold barrel grip housing Improved cooling performance provides both easy-to-hold small diameter housing and less heat generation of the housing - Continuous rating input: 1900 W Compared with the current models, continuous rating input has been drastically increased due to the following two measures: • Heat generation in armature reduced by using high grade steel sheet, ∙ the material composition of which has been changed, ∙ the thickness of which has been reduced from 0.5 mm to 0.35 mm • Cooling performance improved by: ∙ Repositioned elec - AFT (Active Feedback sensing Technology) for kickback reduction automatically shuts off the power supply to motor in the case of a sudden drastic decrease in wheel speed - Toolless wheel cover with Slide style lever Bevel can be adjusted and removed by sliding the lever - SJS II (Super Joint System II) - Soft start - Constant speed control - Current limiter - Anti-restart function Specifications: Carbon Brush: 264 Continuous Rating Input: 1,900W Abrasive grinding wheel diameter: 125 mm (5") Abrasive cut-off wheel diameter: 125 mm (5") Disc paper diameter: 125 mm (5") Rubber pad diameter: 115 mm (4-1/2") Hole diameter: 22.23 mm (7/8") Max abrasive wheel thickness: 7.2 mm (9/32") Thread: M14x2.0 Cup diamond wheel usable or not?: mm: YES, inch: YES No load speed (RPM): 11,500 Dimensions at grip portion (W x H): 66 x 59 mm (2-5/8 x 2-5/16") Circumference of grip portion: 205 mm (8-1/8") Dimensions (L x W x H): 326 x 140 x 123 mm (12-7/8 x 5-1/2 x 4-7/8") Brush diameter capacity: 125 mm (5") Cup brush diameter capacity: 75 mm (3") Diamond wheel diameter: 125 mm (5") Net weight: 2.6 - 5.7 kg (5.7 - 8.4 lbs.) Standard accessories: Cutting wheel cover attachment 125 set 199710-5(1), Lock nut wrench 35 782423-1(1), GRINDING WHEEL 125 WA36N A-80656(1)