Makita AN924 Pneumatic Framing Nailer

Makita AN924 pneumatic framing nailer. Features: - 90 mm (3-1/2") Pneumatic Framing Nailer, 21° Full Round Head - Lightweight at 3.8 kg (8.3 lbs.) - Quicker continuous driving on contact actuation mode - Contact arm wiht sure-grip spikes minimizes slipping - Ergonomically designed handle with sure grip for comfortable handling - Nail loading from the upper opening of magazine is convenient to insert an additional strip - Hook can be attached on either left/right side - Drives up to 90 mm (3-1/2") x 3.76 mm (.148") nails - 2-mode selector switch (contact, sequential) allows user control over nailing options - Large capacity air chamber for increased power to drive nails varying in length from 50 mm (2") to 90 mm (3-1/2") - Anti-dry mechanism stops tool when a few nails remain in the magazine - "Tool-less" depth adjustment engineered for more precise flush and countersink nailing - Rubber bumpers protect the tool and surface from damage Specifications: Capacity: Length: 50 - 90 mm (2 - 3-1/2") Dia.: 2.9 - 3.76 mm (0.113 - 0.148") Angle: 21° Operating pressure: 0.49 - 0.83 MPa (70 - 120 PSI) Magazine capacity: 64 - 73 Driving stroke: 126 mm (5") Cylinder bore diameter: 57 mm (2-1/4") Sound pressure level: N/A dB(A) Sound power level: N/A dB(A) Noise K factor: N/A dB(A) Vibration level: N/A m/s² Vibration K factor: N/A m/s² Dimensions (L x W x H): 560 x 117 x 348 mm (22 x 4-5/8 x 13-3/4") Net weight: 3.8 kg (8.3 lbs.) Standard accessories: Oil supply (country-specific), Hook, Hex wrench