Fischer Nail anchor FNA II

The fischer nail anchor FNA II with a nail head is made from zinc-plated steel, stainless steel, and highly corrosion-resistant steel. The FNA II is primarily suitable for the anchoring of fire protection boards, ventilation systems, metal rails, and subframe systems. The European Technical Approval and classification as per fire resistance class R 120 ensure added safety. The FNA is mounted in a few hammer blows or with a hammer drill in a time-saving push-through installation. The FNA II expands automatically under load. The cone is pulled into the expansion clip and expands it against the drill hole. Features: - The special active principle allows for a simple hammerset installation and, therefore, a short processing time. - The extremely short anchor depth prevents reinforcement hits, and creates the conditions for a trouble-free installation. - The optimised expansion clip ensures hold when placing in the drill hole, and prevents it falling out during overhead installations. - The massive shaft cross-section guarantees a high load-bearing capacity, thus offering an extremely high level of safety. - A range of head shapes allows for the fixing of wide-ranging fixtures, and for the ideal adaptation to suit the intended use. Specifications: Applications: Fire protection plates, Fire protection boards, Ventilation systems, Wire and nonious hangers, Mounting rails, Metal clamps, Substructures made of wood and metal Building materials: Approved for: Concrete C12/15 to C50/60, cracked, for multiple fixings of non-structural applications Suitable for: Solid sand-lime brick Natural stone with dense structure Prestressed hollow-core concrete slabs fischer range: Steel fixings > Nail anchor > Nail anchor FNA II Article variants: 2