Fischer Bolt anchor FBN II (size 12)

The fischer bolt anchor FBN II is a steel anchor for cost-effective fixations in non-cracked concrete. Thanks to its long thread and the two anchorage depths, the fischer bolt anchor FBN II is particularly flexible. In addition to pre-positioned and push-through installation, the bolt anchor is suitable for stand-off installation. In the stainless steel design, the bolt anchor is suitable for façade sub-structures, cantilevers and ladders outside. Features: - The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required. - The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility. - The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility. - Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation. - The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment. Specifications: Applications: Steel constructions, Guard rails, Consoles, Ladders, Cable trays, Machines, Staircases, Gates Building materials: Approved for: Concrete C20/25 to C50/60, for non-cracked concrete Suitable for: Concrete C12/15 Natural stone with dense structure fischer range: Steel fixings > Bolt anchor > Bolt anchor FBN II Article variants: 17 of 60 in the family