Skip to content
Kohler Hone Wall-mount bath spout with diverter (K-22544IN)

Faucet technical guide

Kohler Hone Wall-mount bath spout with diverter (K-22544IN): technical guide

Kohler Hone Wall-mount bath spout with diverter (K-22544IN) is a faucet from Kohler. Timeless and deliberate, the KOHLER Hone collection captures the essence of minimalist design, where beauty lies in simplicity and precision. By stripping away unnecessary details, this carefully curated collection invites an emotional connection through its stark yet refined aesthetic. With sleek, squared edges and clean lines, the Hone wall-mount bath spout with diverter exemplifies modern elegance, transforming daily rituals into moments of subtle sophistication. Rooted in impeccable craftsmanship, the contemporary KOHLER Hone faucet collection draws inspiration from the refined allure of modern European design. Every element is thoughtfully crafted to deliver both functionality and aesthetic appeal, seamlessly merging form with utility. Ideal for connoisseurs of understated elegance, the Hone collection enhances your bathroom with timeless charm and enduring style, embodying the perfect harmony of modern design and reliable performance.

  • Chrome finish is easy to wipe clean and matches most bathroom fittings
  • Polished Chrome, Vibrant French Gold finish suits a designer bathroom
  • Versatile modern design

Best for

  • Wall-mounted installation

Pros

  • Chrome finish is easy to wipe clean and matches most bathroom fittings
  • Polished Chrome, Vibrant French Gold finish suits a designer bathroom
  • Versatile modern design
  • 16.2 cm (6.38 inch) spout reach
  • Diverter spout with G 1/2 connection

Cons

  • Coloured and matt finishes show scratches if cleaned with abrasives

Key specifications

As stated by the maker.

Brand
Kohler
Collection
Hone
Product number
K-22544IN
Type
Wall-mount bath spout with diverter
Category
Bathtub Faucets
Overall length
4-7/8 in
Overall width
2-3/4 in
Overall height
2-3/4 in
Installation
Wall-mount
Finishes
Polished Chrome, Vibrant French Gold

Warranty and validity

Warranty
Not stated in the maker’s catalogue. Ask us before ordering and we will confirm it with the brand.

How to use it

  • Match the faucet to the basin or sink: a pillar tap or basin mixer sits on a basin with a tap hole, while a wall-mounted tap needs a supply point in the wall.
  • A mixer needs both hot and cold supply lines; a pillar cock or bib cock works on one.
  • Check the spout height and reach against the basin, so the water lands in the bowl without splashing.

Installation

  • Shut the supply and flush the pipes before fitting, so debris does not block the aerator or the cartridge.
  • Seal threaded joints with PTFE tape and tighten by hand, then a final turn with a spanner; overtightening cracks fittings.
  • A concealed (in-wall) mixer needs its concealed body fixed in the wall before the wall is tiled.
  • Fit the faucet with the connectors and hoses the maker specifies.

Care and maintenance

  • Clean chrome and coloured finishes with mild soap and a soft cloth. Abrasive powders and acid cleaners strip the plating.
  • Unscrew and rinse the aerator now and then; hard water leaves scale that weakens the flow.
  • A dripping faucet usually needs a new cartridge or washer, not a new faucet.

Buying tips

  • Ceramic-disc cartridges outlast rubber-washer spindles and turn more smoothly.
  • Coloured and PVD finishes cost more than chrome and need gentler cleaning.
  • Homes fed by an overhead tank have low water pressure; check the maker’s minimum working pressure where it is stated.

Maker and compliance details

Manufacturer / brand
Kohler
Model code
K-22544IN

Compare with similar products

Compare with similar products
Specification
Kohler Hone Wall-mount bath spout with diverter (K-22544IN)
This productKohler Hone Wall-mount bath spout with diverter (K-22544IN)
Price

from ₹4,589

from ₹4,229

₹4,630

₹4,650

BrandKohlerKohlerHindwareParryware
CollectionHoneHoneHindwareUno
Product numberK-22544INK-22544IN-N——
TypeWall-mount bath spout with diverterWall-mount bath spout with diverter——
CategoryBathtub FaucetsBathtub Faucets——
Overall length4-7/8 in6-7/16 in——
Overall width2-3/4 in2-3/8 in——
Overall height2-3/4 in2-3/8 in——
InstallationWall-mountWall-mount——
FinishesPolished Chrome, Vibrant French GoldPolished Chrome, Vibrant French Gold——
Warranty——12 Years—

Values as each maker states them. “—” means the maker does not state it.

Frequently asked questions

The maker’s catalogue does not state a warranty for this product. Ask us before ordering and we will confirm it with the brand.

Going by its stated specifications, it suits: Wall-mounted installation.

Most faucets work on overhead-tank pressure, but flow is gentler. Where the maker states a minimum working pressure, compare it with your supply.

Use mild soap and water with a soft cloth, then wipe dry. Avoid acid cleaners, bleach and scouring powder.

Product facts are from the maker’s published data; the use, fitting and care advice applies to faucets in general. Last updated 9 November 2026.