Faucet technical guide
Kohler Complementary Wall-mount bath spout with diverter: technical guide
Kohler Complementary Wall-mount bath spout with diverter is a faucet from Kohler. The Complementary wall-mount bath spout delivers modern elegance and function to your bathing space. A classic pin diverter ensures a quick fill for your bath, or directs water to the showerhead outlet when pulled up. This timeless and contemporary bath spout coordinates with a variety of bathroom styles.
- Chrome finish is easy to wipe clean and matches most bathroom fittings
- Polished Chrome, Vibrant French Gold, Vibrant Brushed… finish suits a designer bathroom
- Diverter spout with G 1/2 connection
Best for
- Wall-mounted installation
Pros
- Chrome finish is easy to wipe clean and matches most bathroom fittings
- Polished Chrome, Vibrant French Gold, Vibrant Brushed… finish suits a designer bathroom
- Diverter spout with G 1/2 connection
- 5.6 inch (14.2 cm) spout reach
- KOHLER finishes resist corrosion and tarnishing
Cons
- Coloured and matt finishes show scratches if cleaned with abrasives
Key specifications
As stated by the maker.
- Brand
- Kohler
- Collection
- Complementary
- Product number
- K-10386IN
- Type
- Wall-mount bath spout with diverter
- Category
- Bathtub Faucets
- Overall length
- 5-5/8 in
- Overall width
- 2-3/4 in
- Overall height
- 1-3/4 in
- Installation
- Wall-mount
- Finishes
- Polished Chrome, Vibrant French Gold, Vibrant Brushed Bronze, Vibrant Brushed Rose Gold
Warranty and validity
- Warranty
- Not stated in the maker’s catalogue. Ask us before ordering and we will confirm it with the brand.
How to use it
- Match the faucet to the basin or sink: a pillar tap or basin mixer sits on a basin with a tap hole, while a wall-mounted tap needs a supply point in the wall.
- A mixer needs both hot and cold supply lines; a pillar cock or bib cock works on one.
- Check the spout height and reach against the basin, so the water lands in the bowl without splashing.
Installation
- Shut the supply and flush the pipes before fitting, so debris does not block the aerator or the cartridge.
- Seal threaded joints with PTFE tape and tighten by hand, then a final turn with a spanner; overtightening cracks fittings.
- A concealed (in-wall) mixer needs its concealed body fixed in the wall before the wall is tiled.
- Fit the faucet with the connectors and hoses the maker specifies.
Care and maintenance
- Clean chrome and coloured finishes with mild soap and a soft cloth. Abrasive powders and acid cleaners strip the plating.
- Unscrew and rinse the aerator now and then; hard water leaves scale that weakens the flow.
- A dripping faucet usually needs a new cartridge or washer, not a new faucet.
Buying tips
- Ceramic-disc cartridges outlast rubber-washer spindles and turn more smoothly.
- Coloured and PVD finishes cost more than chrome and need gentler cleaning.
- Homes fed by an overhead tank have low water pressure; check the maker’s minimum working pressure where it is stated.
Maker and compliance details
- Manufacturer / brand
- Kohler
- Model code
- K-10386IN
Compare with similar products
| Specification | | |||
|---|---|---|---|---|
| Price | from ₹3,239 | ₹3,149 | ₹3,350 | ₹3,350 |
| Brand | Kohler | Kohler | Hindware | Parryware |
| Collection | Complementary | Beam | Hindware | Alpha |
| Product number | K-10386IN | K-26047IN | — | — |
| Type | Wall-mount bath spout with diverter | Wall-mount bath spout with diverter | — | — |
| Category | Bathtub Faucets | Bathtub Faucets | — | — |
| Overall length | 5-5/8 in | 8 in | — | — |
| Overall width | 2-3/4 in | 2-3/8 in | — | — |
| Overall height | 1-3/4 in | 2-7/8 in | — | — |
| Installation | Wall-mount | Wall-mount | — | — |
| Finishes | Polished Chrome, Vibrant French Gold, Vibrant Brushed Bronze, Vibrant Brushed Rose Gold | Polished Chrome | — | — |
| Warranty | — | — | 12 Years | 10 years |
Values as each maker states them. “—” means the maker does not state it.
Frequently asked questions
The maker’s catalogue does not state a warranty for this product. Ask us before ordering and we will confirm it with the brand.
Going by its stated specifications, it suits: Wall-mounted installation.
Most faucets work on overhead-tank pressure, but flow is gentler. Where the maker states a minimum working pressure, compare it with your supply.
Use mild soap and water with a soft cloth, then wipe dry. Avoid acid cleaners, bleach and scouring powder.
Product facts are from the maker’s published data; the use, fitting and care advice applies to faucets in general. Last updated 9 November 2026.