Faucet technical guide
Hindware Flora Prime Pillar Cock Tall: technical guide
Hindware Flora Prime Pillar Cock Tall is a faucet from Hindware. Add a touch of height and elegance to your basin with the Flora Prime Pillar Cock – Tall. Its extended body offers both aesthetic sophistication and ergonomic functionality for modern bathrooms. Tall Profile Design – Ideal for countertop basins, providing ample clearance. Durable Brass Body – Built to withstand daily use and resist corrosion. Glossy Chrome Finish – Enhances shine while protecting against rust and tarnish. Smooth Single Lever – Ensures easy and precise water control. Sleek Contemporary Look – Complements minimalist and premium bath spaces.
- Warranty: 12 Years
- Chrome finish is easy to wipe clean and matches most bathroom fittings
- Collection: Hindware Italian Collection
Best for
- Deck or counter-top mounting
Pros
- Chrome finish is easy to wipe clean and matches most bathroom fittings
Cons
- Hard water leaves scale on the aerator and finish, so it needs regular cleaning
Key specifications
As stated by the maker.
- Collection
- Hindware Italian Collection
- Warranty
- 12 Years
- Mount Type
- Table Mount
- Colour
- Chrome
- Model code
- F780002CP
Warranty and validity
- Warranty
- 12 Years (as stated by the maker)
How to use it
- Match the faucet to the basin or sink: a pillar tap or basin mixer sits on a basin with a tap hole, while a wall-mounted tap needs a supply point in the wall.
- A mixer needs both hot and cold supply lines; a pillar cock or bib cock works on one.
- Check the spout height and reach against the basin, so the water lands in the bowl without splashing.
Installation
- Shut the supply and flush the pipes before fitting, so debris does not block the aerator or the cartridge.
- Seal threaded joints with PTFE tape and tighten by hand, then a final turn with a spanner; overtightening cracks fittings.
- A concealed (in-wall) mixer needs its concealed body fixed in the wall before the wall is tiled.
- Fit the faucet with the connectors and hoses the maker specifies.
Care and maintenance
- Clean chrome and coloured finishes with mild soap and a soft cloth. Abrasive powders and acid cleaners strip the plating.
- Unscrew and rinse the aerator now and then; hard water leaves scale that weakens the flow.
- A dripping faucet usually needs a new cartridge or washer, not a new faucet.
Buying tips
- Ceramic-disc cartridges outlast rubber-washer spindles and turn more smoothly.
- Coloured and PVD finishes cost more than chrome and need gentler cleaning.
- Homes fed by an overhead tank have low water pressure; check the maker’s minimum working pressure where it is stated.
Maker and compliance details
- Manufacturer / brand
- Hindware
- Model code
- F780002CP
Frequently asked questions
The maker states: 12 Years. Keep the invoice; warranty claims go through the maker.
Going by its stated specifications, it suits: Deck or counter-top mounting.
Most faucets work on overhead-tank pressure, but flow is gentler. Where the maker states a minimum working pressure, compare it with your supply.
Use mild soap and water with a soft cloth, then wipe dry. Avoid acid cleaners, bleach and scouring powder.
Product facts are from the maker’s published data; the use, fitting and care advice applies to faucets in general. Last updated 9 November 2026.