Faucet technical guide
Hindware Flora Prime Bath Tub Spout: technical guide
Hindware Flora Prime Bath Tub Spout is a faucet from Hindware. Add a touch of sophistication to your bath space with the Flora Prime Bath Tub Spout, designed for effortless water flow and sleek elegance. Streamlined Design – Blends beautifully with modern bathroom aesthetics. Durable Brass Body – Built to resist corrosion and ensure long-term use. High-Quality Chrome Finish – Provides a mirror-like sheen and resists tarnishing. Easy Installation – Wall-mounted spout with minimal fittings for a clean setup. Perfect Pairing – Complements other products in the Flora Prime collection for a coordinated look.
- Warranty: 12 Years
- Chrome finish is easy to wipe clean and matches most bathroom fittings
- Collection: Hindware Italian Collection
Best for
- Wall-mounted installation
Pros
- Chrome finish is easy to wipe clean and matches most bathroom fittings
Cons
- Hard water leaves scale on the aerator and finish, so it needs regular cleaning
Key specifications
As stated by the maker.
- Collection
- Hindware Italian Collection
- Warranty
- 12 Years
- Mount Type
- Wall Mount
- Colour
- Chrome
- Model code
- F780009CP
Warranty and validity
- Warranty
- 12 Years (as stated by the maker)
How to use it
- Match the faucet to the basin or sink: a pillar tap or basin mixer sits on a basin with a tap hole, while a wall-mounted tap needs a supply point in the wall.
- A mixer needs both hot and cold supply lines; a pillar cock or bib cock works on one.
- Check the spout height and reach against the basin, so the water lands in the bowl without splashing.
Installation
- Shut the supply and flush the pipes before fitting, so debris does not block the aerator or the cartridge.
- Seal threaded joints with PTFE tape and tighten by hand, then a final turn with a spanner; overtightening cracks fittings.
- A concealed (in-wall) mixer needs its concealed body fixed in the wall before the wall is tiled.
- Fit the faucet with the connectors and hoses the maker specifies.
Care and maintenance
- Clean chrome and coloured finishes with mild soap and a soft cloth. Abrasive powders and acid cleaners strip the plating.
- Unscrew and rinse the aerator now and then; hard water leaves scale that weakens the flow.
- A dripping faucet usually needs a new cartridge or washer, not a new faucet.
Buying tips
- Ceramic-disc cartridges outlast rubber-washer spindles and turn more smoothly.
- Coloured and PVD finishes cost more than chrome and need gentler cleaning.
- Homes fed by an overhead tank have low water pressure; check the maker’s minimum working pressure where it is stated.
Maker and compliance details
- Manufacturer / brand
- Hindware
- Model code
- F780009CP
Compare with similar products
| Specification | | |||
|---|---|---|---|---|
| Price | ₹2,140 | ₹2,170 | from ₹2,580 | ₹2,125 |
| Brand | Hindware | Hindware | Cera Luxe | Jaquar |
| Collection | Hindware Italian Collection | Hindware | — | — |
| Mount Type | Wall Mount | Wall Mount | Wall mount | — |
| Colour | Chrome | Chrome | Chrome | — |
| Warranty | 12 Years | 12 Years | — | — |
Values as each maker states them. “—” means the maker does not state it.
Frequently asked questions
The maker states: 12 Years. Keep the invoice; warranty claims go through the maker.
Going by its stated specifications, it suits: Wall-mounted installation.
Most faucets work on overhead-tank pressure, but flow is gentler. Where the maker states a minimum working pressure, compare it with your supply.
Use mild soap and water with a soft cloth, then wipe dry. Avoid acid cleaners, bleach and scouring powder.
Product facts are from the maker’s published data; the use, fitting and care advice applies to faucets in general. Last updated 9 November 2026.