Finolex ACCL Automatic Changeover

Heavy Duty-Conforms to utilisation category AC32A (IEC60947-6) & AC22A (IEC 60947-3) can switch heavy loads Features: - Versatile – Can be used in new buildings as well as retrofitting I.E 2 sub main or 1 sub main wiring method. - Unique - Contactor based single phase ACCL - Safe – 5 KA short circuit capacity - User Friendly – During overload, load will be on for 10sec so that user gets some time to switch off unwanted loads - Energy Efficient – Low power consumption as coil operate only during generator supply - Alerts – Overload indication cia LED & beep. - Long Life – 25000 operations. - Cool – Low temperature rise as power consumed is less than 0.2va on mains supply - Technically Superior – Break before make changeover contacts with higher air gap. - Tested At Third Party – Ul lab. - Convenient – Auto reset facility Specifications: Supply Voltage: 240 VAC-Single Phase Supply Frequency: 50 Hz Power Consumption: <0.2 VA (Mains) Electrical Life: 25,000 Operations Contact Rating: 30A @240 VAC(Res) Utilization Category: AC-22A(IEC 60947-3) / AC -32A(60947-6) Current Monitoring: On Genset only Mains Current Rating: 30A Max. Genset Current Rating: 0.5A to 30A Tripping Accuracy: ± 10% of tripping current Timing Accuracy: ± 5% Duty: Continuous Operation Position: Horizontal Mounting: DIN (35 x 7.5 mm) Operating Temperature: -5 to 55°C Storage Temperature: -10 to 60°C Operating Humidity: 5 to 85% RH Pollution Degree: III IP Protection IP 20: Terminal Enclosure Weight (un-packed): 320 gm