Ardex Endura White Star

Ardex Endura White Star is a white cement based, high polymer modified, tile/stone adhesive. High polymer modified, white cement-based tile adhesive suitable for fixing tiles with less than 3% porosity, like vitrified, semi-vitrified tiles and natural stones on walls and floor in interior and exterior situations. WHITE STAR is specially designed to fix marble tiles/stones to prevent discoloration/stains due to iron-oxide. The set adhesive is water-resistant and is suitable for use in showers, wet areas and swimming pools. Also, ideal for renovation (tile-over-tile) for quick & easy installation works. Features: - High bond strength - Easy mixing, smooth application & better workability - Suitable for most common substrates and tiles - Water resistant - Enhanced flexibility & adhesion can be obtained with addition of ADMIX AD1 (latex additive) Specifications: Type: White cement based, high polymer modified, tile/stone adhesive Note: Not recommended for direct use onto gypsum plaster (wall finishes), paint or metal. Standards: - Confirms to IS 15477: 2019 Type 2T "Adhesives for use with Ceramic, Mosaic and Stone Tiles" - Confirms to EN 12004: 2017 and is a normal cementitious adhesive (C1) with slip resistance (T) of class C1T Coverage: Approximately 1.35 - 1.40 kg/m2/mm (full table in the technical data sheet) Pack sizes: 20 kg Technical data sheet: https://www.ardexendura.com/site/assets/files/1028/white_star_tds-1.pdf