Ardex Endura Diamond Star

Ardex Endura Diamond Star is a high performance, polymer modified, non-slip adhesive. Grey cement based, high performance, high strength adhesive for fixing tiles/stones in areas of limited movement or vibration as it can accommodate shocks due to impact load and heavy traffic. The set adhesive is water-resistant and non-slip. Features: - Very high bond strength - Non-slip - Deformable to accommodate minor shocks - Water resistant - Easy mixing, smooth application & better workability - Enhanced flexibility & adhesion can be obtained with addition of ADMIX AD1 (latex additive) Specifications: Type: High performance, polymer modified, non-slip adhesive Note: Not recommended for direct use onto gypsum plaster (wall finishes), paint or metal. Standards: Confirms to IS 15477: 2019 Type 3T "Specification for Adhesives for use with Ceramic, Mosaic and Stone Tiles". Confirms to EN 12004: 2017 and is an improvedcementitious adhesive (C2) with slip resistance (T) and extendedopen time (E) of class C2TE. Coverage: Approximately 1.25 -1.35 kg/m2/mm (full table in the technical data sheet) Pack sizes: 20 kg Technical data sheet: https://www.ardexendura.com/site/assets/files/1029/diamond_star_grey_tds.pdf